Set of dies

€0.00

Select your die set based on the crimping press and the terminal or sleeve to be crimped

Characteristics
Reference
Crimping tool model
Tubular lug or sleeve to crimp
Lug or sleeve cross section (mm²)

In order to achieve a compliant crimp, it is essential to use the dies adapted to the tool and the connector to be crimped, as well as respecting the crimping recommendations relating to the connector (number of passes, position of the indentations,...). During crimping, dies must close perfectly to achieve a satisfactory compression ratio.

Our technical sales representatives are at your disposal to advise you on the choice of equipment and its implementation.

OUTIL-K22-NF2216

Data sheet

{0}

Products that you might need

E P
close

Wishlist