Language:
-
-
-
Products range
-
-
-
Products
-
-
-
EARTH BRAID ONLINE CONFIGURATOR
You do not find your earth braid ?
Access our online earth braid configurator !
-
-
-
Discover
-
-
-
-
-
-
Products range
-
-
-
Products
-
-
-
-
-
-
-
Products range
-
-
-
Earthing and grounding products
- Bimetallic washers and plates
- Cable holders
- Clamp connection solutions
- Conductors holders and accessories
- Crimp connection solutions
- Disconnecting links
- Earth clamps for substation
- Earth rods and accessories
- Earthing grids and plates
- Equipotential earth bars
- Fixed earth terminals and clamps
- Heat shrink tubes
- Insulators
- Parallel clamps
-
-
-
Fastening products
-
-
-
Discover
- Earthing and grounding : Galvanic corrosion
- Earthing and grounding : Substations
- Earthing and grounding : Telecommunication masts
- Earthing and grounding : Wind turbines
- Products : Earth rods
- Products : Equipotential bonding bars
- Tools : Crimping tools kit for substations
- Tools : Crimping tools range
-
-
-
-
-
-
Products range
-
-
-
-
-
-
-
-
Products range
-
-
-
Complete Kits
-
-
-
-
Discover
-
-
-
-
-
-
Products range
-
-
-
-
-
Crow foot clamp
€0.00
For making crow's foot earth electrodees with 30x2 or 30x3.5mm tape conductor
Characteristics
- Reference
The crow's foot clamp is a simple solution for building a crow's foot type grounding electrodee. The crow's foot groudning electrodee allows a better diffusion of the lightning current in the ground, this last one can be connected to grounding rods in order to obtain the desired grounding earth resistance.
MALTEP proposes a crow's clamp made of tinned copper and as per IEC EN 62561-1 standard: Lightning protection system components - connection components. This clamp fits with 30x2mm to 30x3,5 mm tape conductor, the tightening is made on the down conductor by tightening M8 stainless steel bolts.
PO302
Data sheet
- Material
- Copper
- Admissible conductors
- Tape with width 30mm
- Weight (Kg)
- 0.60
- Standard of reference
- IEC 62561-1 : Lightning protection system components (LPSC) – Part 1: Requirements for connection components
- HS code
- 74091900
- Order code
- 290262
Products that you might need
-
Default
⚡ BALFOUR BEATTY HS2 ⚡Balfour Beatty - VINCI consortium wins contract for civil works packages N1 and N2 of the HS2 high-speed line project in the UK
-
Default
⚡ Karting Evening ⚡This Thursday, October 6th, the administrative and commercial teams of MALTEP met for a fun evening at the karting of Selestat. We started with a few warm-up laps to get our bearings on the [...]