Disconnecting links mounted on low voltage insulators
For disconnection purposes during ground measurements, of the grounding circuit between earth rods and distribution terminal block of the electrical panel
- Reference
The disconnecting links are elements imposed by the French NFC 15-100 standard in earth connection and equipotential'installations. They are usually located in an accessible part of the earthing and grounding circuit and allow the disconnection of the earth electrodee in order to measure the earth resistance, during electrical inspections. The ground resistance must not exceed 100 ohms for the installation to be validated.
MALTEP offers a range of disconnecting links consisting of a conductive copper part, which is screwed onto insulators and a mounting plate support for walls or frames. The disconnecting links are available in different sizes compatible with different cable cross sections. Some models are offered with porcelain insulators, especially designed for an outdoor use.
► Technical documentation
Access all our MALTEP technical documentation by creating your personnal account |
Data sheet
- {0}
Products that you might need
Default
⚡ New model of sectionable equipotential bonding bar ⚡Ask for your custom equipotential bonding bar
Default
⚡ MALTEP participates in the Middle East Energy exhibition in Dubai ⚡As every year, for the last 5 years, MALTEP will be present at the Middle East Energy exhibition in Dubai, United Arab Emirates. We will be there from 16th to 18th of April to present our e [...]