-
MenuBack
-
Earth braids
-
-
Products range
-
-
-
Products
-
-
-
Discover
-
-
-
-
CONDUCTORS
-
-
Products range
-
-
-
Products
-
-
-
-
-
EARTHING AND GROUNDING
-
-
Products range
-
-
-
Earthing and grounding products
- Bimetallic washers and plates
- Cable holders
- Clamp connection solutions
- Conductors holders and accessories
- Crimp connection solutions
- Disconnecting links
- Earth clamps for substation
- Earth rods and accessories
- Earthing grids and plates
- Equipotential earth bars
- Fixed earth terminals and clamps
- Heat shrink tubes
- Insulators
- Parallel clamps
-
-
-
Fastening products
-
-
-
Discover
- Earthing and grounding : Building's foundations
- Earthing and grounding : Galvanic corrosion
- Earthing and grounding : Overview
- Earthing and grounding : Substations
- Earthing and grounding : Telecommunication masts
- Earthing and grounding : Wind turbines
- Mise à la terre et protection : Clôtures
- Products : Earth rods
- Products : Equipotential bonding bars
- Tools : Crimping tools kit for substations
- Tools : Crimping tools range
-
-
-
-
LIGHTNING PROTECTION
-
-
Products range
-
-
-
-
-
-
EXOTHERMIC WELDING
-
-
Products range
-
-
-
Complete Kits
-
-
-
-
Discover
-
-
-
-
Tools and Measurement
-
-
Products range
-
-
-
-
-
-
Tools and Measurement
-
-
Products range
-
-
-
-
- News
Lightning rod extension masts
Compliant with IEC EN 62561-2, for use with lightning rods
- Reference
In a lightning protection system, the probability of a lightning current entering a structure or building is significantly reduced by the presence of a properly designed capture device. Capture devices typically consist of the following:
- Standard lighting or ESE rods
- Lighting air terminals in the case of a Faraday type lightning protection system
The sizing, the installation as well as the positioning of the lightning conductors and accessories are standardized as well from the point of view of the manufacturing (IEC EN 62561) as from the point of view of the installation and the use of the device (IEC EN 62305).
MALTEP offers a range of elements to capture a lightning strike current, allowing you to achieve a complete lightning protection system whether by standard lightning rod, ESE lightning rod or Faraday cage. Our products are offered in stainless steel accompanied by solutions for holding and connecting to the down conductor.
► Technical documentation
Access all our MALTEP technical documentation by creating your personnal account |
Data sheet
- {0}
Products that you might need
-
Default
⚡ New model of sectionable equipotential bonding bar ⚡Ask for your custom equipotential bonding bar
- Material
- A2 (304) Stainless steel
- Diameter (mm)
- 30
- Length (m)
- 2.00
- Weight (Kg)
- 3.00
- Standard of reference
- IEC 62561-2 : Lightning protection system components (LPSC) – Part 2: Requirements for conductors and earth electrodes
- HS code
- 73064020
- Order code
- 246304
- Material
- A2 (304) Stainless steel
- Diameter (mm)
- 42
- Length (m)
- 2.00
- Weight (Kg)
- 4.70
- Standard of reference
- IEC 62561-2 : Lightning protection system components (LPSC) – Part 2: Requirements for conductors and earth electrodes
- HS code
- 73064020
- Order code
- 246305
- Material
- A2 (304) Stainless steel
- Diameter (mm)
- 42
- Length (m)
- 2.00
- Weight (Kg)
- 5.00
- Standard of reference
- IEC 62561-2 : Lightning protection system components (LPSC) – Part 2: Requirements for conductors and earth electrodes
- HS code
- 73064020
- Order code
- 246306