-
-
-
Products range
-
-
-
Products
-
-
-
EARTH BRAID ONLINE CONFIGURATOR
You do not find your earth braid ?
Access our online earth braid configurator !
-
-
-
-
-
-
Products range
-
-
-
Products
-
-
-
-
-
-
Products range
-
-
-
Earthing and grounding products
- Bimetallic washers and plates
- Cable holders
- Clamp connection solutions
- Clamps for rebars
- Clamps for steel structure
- Conductors holders and accessories
- Crimp connection solutions
- Disconnecting links
- Earth clamps for substation
- Earth points
- Earth rods and accessories
- Earthing grids and plates
- Heat shrink tubes
- Insulators
- Parallel clamps
- Zip and ribbon ties
-
-
-
-
Fastening products
-
-
-
-
-
-
Products range
-
-
-
-
-
-
-
Products range
-
-
-
Complete Kits
-
-
-
-
-
-
-
Products range
-
-
-
-
-
-
-
Products range
-
-
-
-
Crimping tool kit for substations
The MALTEP crimping kit is designed specifically for your work on grounding circuits on HV/HV substations.
|
|
DEDICATED TOOL FOR SUB STATION |
Characteristics
- Reference
► 13T Crimp Press
The MALTEP crimping kit is specially design for your works on earthing and grouding circuits on substations
• A 13 tonnes crimping press robust and reliable, delivered with two batteries
| Characteristics | |
| Strenght (kN) | 130 |
| Course (mm) | 26 |
| Crimp time (sec.) | 8-9 |
| Autonomie (cycles) | 150 |
| Batterie | 18 V Li-Ion 5 A |
| Operating temperature (°C) | -10/+50 |
| Dimensions (mm) | 400x75x310 |
| Weight (Kg) | 6.5 with battery |
| Hexagonal Crimp | 6 > 300 mm² |
• A set of 8 dies for tubular lugs of type CDCT tand C crimp of type RDCT
| Characteristics | |
| Application | Substations |
| Earthing circuits | |
| RDCT (C crimps) | From 75 to 150 mm² |
| CDCT (Tubular lugs) | From 75 to 240 mm² |
► Correspondence between RTE / MALTEP connectors and dies
Easily find the correspondence between the set of dies and connectors as per RTE / ENEDIS codifications
| Connectors | Cross section (mm²) | RTE Marking | MALTEP reference | Set of Dies | Crimps Print | Number of Crimps | Color Code |
| C crimps | 75 | RDCT-74.9/74.9 | C95• | C130CC95L9 | 1 x 9 mm | 2 | • |
| 95 | |||||||
| 120 | RDCT-116/116 | C120• | C130CC150L5 | 1 x 5 mm | 3 | • | |
| 150 | |||||||
| Tubular lugs | 75 | CDCT-74.9 | CDCT75-• | C130HCT75L14 | 1 x 14 mm | 2 | • |
| 95 | CDCT-95 | CDCT95-• | C130HCT95L14 | 1 x 14 mm | 2 | • | |
| 120 | CDCT-116 | CDCT120-• | C130HCT116L14 | 1 x 14 mm | 2 | • | |
| 150 | CDCT-146 | CDCT150-• | C130HCT146L14 | 1 x 14 mm | 2 | • | |
| 185 | CDCT-181 | CDCT185-• | C130HCT181L14 | 1 x 12 mm | 2 | • | |
| 240 | CDCT-240 | CDCT240-• | C130HCT240L14 | 1 x 12 mm | 2 | • |
► MALTEP Crimping Tips
- For C crimps (RDCT), when three crimps are required, the first crimp must be centered
- For tubular lugs (CDCT), the first crimp must be done to the side of the connection pad
- For proper crimping, the crimping press must go to the end of its stroke (green light on) with dies in contact
► Wants to know more?
|
|
Discover our crimping tool range as well as our overview of earthing and grounding for sub-stations |
BP13026KITCDT
Data sheet
- Type of work
- Crimping of C crimp CDCT type from 75 to 240mm²
Crimping of tubular lugs RDCT type from 75 to 150mm² - Dimensions (mm)
- 594 x 494 x 149
- Weight (Kg)
- 10.10
- Delivery note
- Set includes 1 x 13T crimping tool, 8 sets of dies, 1 charger, 2 batteries and 1 shoulder strap
- HS code
- 84672920
- Order code
- 374436
Products that you might need
-
Default
⚡ MALTEP opens E-commerce to neighboring countries ⚡our e-commerce platform is now open to Belgium, Luxembourg, Germany, and Italy
-
Default
⚡End-of-year closure & best wishes for 2026 ⚡As the holiday season approaches, the MALTEP team would like to warmly thank all our customers and partners for their trust throughout 2025. As every year, we will be taking a winter break to [...]
-
Default
⚡ Now online: Welding equipment storage case⚡Protect your welding equipment from handling and storage incidents and make it easy to store.