Language:
-
- Products range
- Products
- EARTH BRAID ONLINE CONFIGURATOR
You do not find your earth braid ?
Access our online earth braid configurator !
- Discover
-
- Products range
- Products
-
- Products range
- Earthing and grounding products
- Bimetallic washers and plates
- Cable holders
- Clamp connection solutions
- Conductors holders and accessories
- Crimp connection solutions
- Disconnecting links
- Earth clamps for substation
- Earth rods and accessories
- Earthing grids and plates
- Equipotential earth bars
- Fixed earth terminals and clamps
- Heat shrink tubes
- Insulators
- Parallel clamps
- Fastening products
-
- Products range
-
- Products range
- Complete Kits
- Discover
-
- Products range
Lightning strike counter
€0.00
For lightning strike detection and counting
Characteristics
- Reference
The lightning strike counter is a device designed to count the number of lightning strikes conducted through the down conductor on a lightning protection system. On the installation it is found upstream of the test joint.
MALTEP offers a lightning strike counter with digital display conforming to IEC EN 62561-6 (Lightning protection system components) which connects to a tape down conductor (dimensions 25x2 to 30x3.5mm) or solid round (dimensions 8 to 10mm diameter).
CF302-EVO
Data sheet
- Max. Intensity (8/20µs)
- 100kA
- Admissible conductors
- Conductor : 8-10mm (50-70mm²) or tape with width : 30mm
- Weight (Kg)
- 0.37
- Standard of reference
- IEC 62561-1 : Lightning protection system components (LPSC) – Part 1: Requirements for connection components
- HS code
- 85354000
- Order code
- 300958
