Disconnecting links mounted on low voltage insulators

€0.00

For disconnection purposes during ground measurements, of the grounding circuit between earth rods and distribution terminal block of the electrical panel

Characteristics
Reference
Mounted on galvanized rail

The disconnecting links are elements imposed by the French NFC 15-100 standard in earth connection and equipotential'installations. They are usually located in an accessible part of the earthing and grounding circuit and allow the disconnection of the earth electrodee in order to measure the earth resistance, during electrical inspections. The ground resistance must not exceed 100 ohms for the installation to be validated.

MALTEP offers a range of disconnecting links consisting of a conductive copper part, which is screwed onto insulators and a mounting plate support for walls or frames. The disconnecting links are available in different sizes compatible with different cable cross sections. Some models are offered with porcelain insulators, especially designed for an outdoor use. 

BTC

Data sheet

{0}

Products that you might need

    0 - 3
  • Default
    ⚡ BALFOUR BEATTY HS2 ⚡

    Balfour Beatty - VINCI consortium wins contract for civil works packages N1 and N2 of the HS2 high-speed line project in the UK

  • 1 - 3
  • Default
    ⚡ Karting Evening ⚡

    This Thursday, October 6th, the administrative and commercial teams of MALTEP met for a fun evening at the karting of Selestat. We started with a few warm-up laps to get our bearings on the [...]

  • 2 - 3
  • Default
    ⚡ PADSBEE ⚡

    Benin Sustainable and Secure Access to Electricity Project

E P
close

Wishlist