-
-
-
Products range
-
-
-
Products
-
-
-
EARTH BRAID ONLINE CONFIGURATOR
You do not find your earth braid ?
Access our online earth braid configurator !
-
-
-
-
-
-
-
Products range
-
-
-
Products
-
-
-
-
-
-
-
Products range
-
-
-
Earthing and grounding products
- Bimetallic washers and plates
- Cable holders
- Conductors holders and accessories
- Crimp connection solutions
- Disconnecting links
- Earth clamps for substation
- Earth rods and accessories
- Earthing grids and plates
- Equipotential earth bars
- Fixed earth terminals and clamps
- Heat shrink tubes
- Insulators
- Parallel clamps
- Zip and ribbon ties
-
-
-
Fastening products
-
-
-
Discover
- Earthing and grounding : Building's foundations
- Earthing and grounding : Galvanic corrosion
- Earthing and grounding : Overview
- Earthing and grounding : Substations
- Earthing and grounding : Telecommunication masts
- Earthing and grounding : Wind turbines
- How to realize a proper earthing?
- Mise à la terre et protection : Clôtures
- Products : Earth rods
- Products : Equipotential bonding bars
- Tools : Crimping tools kit for substations
- Tools : Crimping tools range
-
-
-
-
-
-
Products range
-
-
-
-
-
-
-
-
Products range
-
-
-
Complete Kits
-
-
-
-
Discover
-
-
-
-
-
-
Products range
-
-
-
-
-
-
-
-
Products range
-
-
-
-
Disconnecting links on porcelain insulators
For disconnection purposes during ground measurements, of the grounding circuit between earth rods and distribution terminal block of the electrical panel
Characteristics
- Reference
The disconnecting links are elements imposed by the French NFC 15-100 standard in earth connection and equipotential'installations. They are usually located in an accessible part of the earthing and grounding circuit and allow the disconnection of the earth electrodee in order to measure the earth resistance, during electrical inspections. The ground resistance must not exceed 100 ohms for the installation to be validated.
MALTEP offers a range of disconnecting links consisting of a conductive copper part, which is screwed onto insulators and a mounting plate support for walls or frames. The disconnecting links are available in different sizes compatible with different cable cross sections. Some models are offered with porcelain insulators, especially designed for an outdoor use.
BTL3570
Data sheet
- Nominal dimensions (mm)
- 150 x 45 x 70
- Admissible conductors cross section (mm²)
- 16 - 70
- HS code
- 85369010
- Order code
- 280798
Products that you might need
-
Default
⚡ MALTEP Participates in the Senegalese power grid development project ⚡VINCI ENERGIES and SENELEC launched work on the second phase, called Pôle 2026, of the Senegalese electricity network development project
-
Default
⚡ MALTEP participates in the Middle East Energy exhibition in Dubai ⚡As every year, for the last 5 years, MALTEP will be present at the Middle East Energy exhibition in Dubai, United Arab Emirates. We will be there from 16th to 18th of April to present our e [...]