Galvanized test joint

To use with tape and round down conductor

The test joint is a lighting protection component designed to break the contact between the top and bottom of a lightning protection system. That is, between the catching device (lightning rod, ESE, air terminal) and the earth electrodee, for measurement purposes. Each down conductor, with the exception of natural down conductors linked to downhole earthing systems, should be fitted with a test joint which is in the closed position in normal use.

MALTEP offers a range of test joints for tape or round conductors in copper, tinned copper or galvanised steel down conductors up to 30mm wide, round from 8 to 12 diameter or cables from 50mm² to 95mm² maximum.

JC81030-A2

Data sheet

Material
A2 (304) Stainless steel
Admissible conductors
Conductor : tape with width 30mm or round dia 8 to 12mm (50 to 95mm²)
Weight (Kg)
0.33
Standard of reference
IEC 62561-1 : Lightning protection system components (LPSC) – Part 1: Requirements for connection components
HS code
85389099
Order code
377629

Products that you might need

E P
close

Wishlist